PL® Premium Construction Adhesive is a polyurethane adhesive that provides superior results and is safer to use than ordinary adhesives. It generates three times the power of traditional construction adhesives, may be used inside or outside and will last as long as the surfaces it joins together.
Quiet Barrier® Tape effectively seals the seams between sheets of Quiet Barrier® or Quiet Barrier® Foam Composites. Quiet Barrier® Tape has the same noise blocking and sound damping qualities as our Quiet Barrier® Soundproofing Materials. Quiet Barrier® Tape has a Pressure Sensitive Adhesive backing for an easy “peal and place” application. Quiet Barrier® Tape has excellent resistance to chemicals and petroleum products.
Clearco 444 Spray Adhesive is a high performance acoustic foam spray adhesive that is easy to apply and will form a strong and long lasting bond to a variety of surfaces. Clearco 444 Spray Adhesive has a “lace” spray pattern that is easy to control, making over spray and clean-up minimal. This adhesive is best for protected, indoor applications. Always use proper ventilation when applying this product.
Quiet Batt® Insulation Supports offer a quick and economical way to secure Quiet Batt® between floor joists and stud wall assemblies. Quiet Batt® Insulation Supports are made of steel and install quickly and easily with a friction fit between 16 in. on center floor joists or studs. No tools are required for installation.
Hanger Pins are used to mount a variety of our soundproofing and sound absorption products. This product is simple to use and install. Attach the hanger pin to the mounting surface then push the product on to the pin so the tip of the pin punctures through the product. Place the Captive Washer over the shaft of the pin and push the washer against the soundproofing or sound absorption product. Then push the Protective Cap on to the pin to complete the installation. Hanger Pins can be installed to walls or ceilings with Pl construction adhesive or with screws. Hanger pin must be located at studs or other types of supports when using screws as the primary fastener. Hanger Pins will work with any product up to a 2 inch thickness. Hanger Pins can be installed on wood, steel or fiberglass mounting surfaces.
