Clearco 444 Spray Adhesive is a high performance acoustic foam spray adhesive that is easy to apply and will form a strong and long lasting bond to a variety of surfaces. Clearco 444 Spray Adhesive has a “lace” spray pattern that is easy to control, making over spray and clean-up minimal. This adhesive is best for protected, indoor applications. Always use proper ventilation when applying this product.
Clearco 444 Spray Adhesive is a high performance acoustic foam spray adhesive that is easy to apply and will form a strong and long lasting bond to a variety of surfaces. Clearco 444 Spray Adhesive has a “lace” spray pattern that is easy to control, making over spray and clean-up minimal. This adhesive is best for protected, indoor applications. Always use proper ventilation when applying this product.
Green Glue is a non-toxic, low-VOC, visco-elastic compound that can be quickly and easily applied between two sheets of drywall, plywood or any commonly used building materials in new construction and remodeling. It effectively reduces noise transfer from one room to another.
Hanger Pins are used to mount a variety of our soundproofing and sound absorption products. This product is simple to use and install. Attach the hanger pin to the mounting surface then push the product on to the pin so the tip of the pin punctures through the product. Place the Captive Washer over the shaft of the pin and push the washer against the soundproofing or sound absorption product. Then push the Protective Cap on to the pin to complete the installation. Hanger Pins can be installed to walls or ceilings with Pl construction adhesive or with screws. Hanger pin must be located at studs or other types of supports when using screws as the primary fastener. Hanger Pins will work with any product up to a 2 inch thickness. Hanger Pins can be installed on wood, steel or fiberglass mounting surfaces.
OSI® Pro-Series® SC-175™ Acoustical Sound Sealant is a water-based sealant designed to reduce sound transmission in both exposed and unexposed walls and partition systems. Its’ Primary function is to achieve and maintain the specific STC (Sound Transmission Class) value of the system design. VOC compliant.
