Quiet Door™ Commercial Door
Soundproofing Kit

Description

Difficulty Level - Easy The Quiet Door™ Commercial Door Soundproofing Kit is a good performing door soundproofing kit that was designed for locations that require moderate sound control. This four part kit offers good performance for doors in commercial and light industrial applications. Quiet Door™ Commercial Door Soundproofing Kits are best used in applications that require moderate soundproofing from moderate noise levels and where aesthetics are not of importance. The Quiet Door™ Commercial Door Soundproofing Kit will treat a standard 36 in. x 86 in. door and can be mounted to wood or steel doors. The components of this kit may need to be cut to ensure a proper fit.

Kit Contents:

• A 5/8 in. thick x 48 in. wide x 96 in. long sheet of Quiet Barrier® Soundproofing Composite that has a 1/2 lb barrier layer, a 1/2 inch acoustic foam decoupling layer with a Pressure Sensitive Adhesive (PSA) backing.
• A Quiet Door™ Adjustable Perimeter Seal that treats a 36 in. wide x 86 in. tall door.
• A Quiet Door™ Automatic Door Sweep for a 36 in. wide door.
• One Tube of our OSI® Pro-Series® SC-175™ Acoustical Sound Sealant.

Product Availability

Special Order Sizes are available.

For details, call 1-866-949-9COW.

Details

Great for:

• Band Practice Room Doors
• Computer and Equipment Room Doors
• Dog kennel Doors
• Gun Range Doors
• Home Recording Studio Doors
• Home Theater Doors
• Homes, Apartment and Condo Doors (if finished appearance doesn’t matter)
• Hotel and Resort Doors
• Warehousing and Industrial Manufacturing Doors

Polyurethane Foam Warning

All Polyurethane Foams, including Combustion Modified Foams, will burn. Do not expose to any flame source. Once ignited, they can produce rapid flame spread, intense heat, dense smoke and toxic gases causing death. Warnings should be given to your employees and or customers. Test data does not necessarily reflect a foams performance under actual fire conditions. Before purchasing any foam, be sure to check with your local code officials to confirm the required flammability rating of exposed materials for your area.

Cautions and Limitations

• Read individual product pages for cautions and limitations.

Installation Details

Tools needed for Mounting the Quiet Barrier® Soundproofing Composite: Utility Knife, Straight Edge, Tape Measure, Pencil or Marker

Tools needed for Mounting the Quiet Door™ Adjustable Perimeter Seal and Automatic Door Sweep: Drill, #38 Drill Bit, Phillips Screwdriver, Hack Saw (for trimming)

Tools needed to apply the Acoustic Sealant: Caulk Gun

Materials Needed: All materials are included with purchase

Resources

• » Download the Product Data Sheet

Top of Page

Previous Product Next Product