PR 11 Water Based Primer
Enlarge Photo
Disclaimer: Image color may vary per monitor settings
Description
Difficulty Level - Easy
PR 11 is a water based primer used to prepare flooring substrates for the application of PROFLEX™ 90 MSC flooring underlayment. This product must be applied to the flooring surface before PROFLEX™ 90 MSC.
One gallon covers approximately 300 sqft when applied with a roller.
One Gallon (covers 300 sqft)
Details
Compatible With
Cautions and Limitations
- Protect Primers from freezing.
- For exterior applications, PR 11 should not be applied if rain is imminent.
- Store in a clean dry location between 50 ºF and 100 ºF.
- Do not thin or mix with any other products.
- Keep out of reach of children.
- Do not swallow or ingest.
- Avoid eye and skin contact. We always recommend eye protection and gloves when installing any of our products.
- Dispose of in an environmentally safe manner.
- Keep covered when not in use.
- Always allow proper ventilation when using any primer, sealant or adhesive.
Instructions
Application
Substrate surface must be clean, dry and free of all bond inhibiting materials. Stir and shake PR 11 thoroughly. Apply with a brush or roller at 300 sqft per gallon. Porous surfaces may require additional applications. Allow PR 11 to dry for 15 to 45 minutes. High humidity levels may extend drying time. Surface will appear slightly opaque when the primer is dry.
Installation
Tools Needed: Brush or Paint Roller Applicator
Materials Needed: 1 Primer Roller is supplied with every roll of PROFLEX™ 90MSC
Resources
Top of Page
Previous Product
Next Product
