Loctite® Power Grab® All Purpose
Construction Adhesive

Enlarge Photo
Disclaimer: Image color may vary per monitor settings

Amount Qty.

Add to Cart Add to Cart & Checkout

Description

Difficulty Level - Very Easy Loctite® Power Grab® All Purpose Construction Adhesive is a premium quality, high strength adhesive which eliminates the need to use screws and nails in many applications.

Product Availability

Loctite® Power Grab® Construction Adhesive is available in single cartridges and by case quantities of 12. Coverage equals 31 linear ft with a ¼ inch bead per cartridge.

Features

Very high initial tack
Water clean up
Low odor
Repositionable
Can be used on wood, metal, drywall, plaster, concrete, and bricks

Details

Compatible With

Cautions and Limitations

Do not use Power Grab® in permanently damp or wet areas.
Protect product from freezing.

Instructions

Application

At least one surface must be porous. If non porous surface is glossy, sand to remove gloss and remove residue. Mounting surface must be clean, dry and free of foreign materials. Remove cap and cut the nozzle at desired angle and width. Apply adhesive with steady pressure to one of the surfaces to be bonded. For large areas, apply adhesive around the perimeter of the item, approximately 2 inches from the edge. Apply additional beads at 12 inch intervals. Open time is 25 minutes. Once the product is applied, you have 15 minutes to arrange or change the position of the substrate.

Cleanup

Power Grab® dries in approximately 24 hours depending on conditions. Wipe excess from skin, clothing and other surfaces before the product hardens. Do not use Power Grab® in permanently damp or wet areas. Protect product from freezing.