Also available in Quiet Door™ Door Sweep
SPECIAL ORDER LENGTHS ARE AVAILABLE.
For details, call 1-866-949-9COW.
Features / Benefits
Acoustically tested — Quiet Door™ Automatic Door Sweeps are tested for acoustic performance by independent laboratories.
Quality — Quiet Door™ Automatic Door Sweeps are manufactured with high quality aluminum and have durable, long lasting Silicone seals. All included mounting hardware is made of stainless steel. These products are considered industrial grade.
Longevity — Due to the automatic nature of this product, the sound seal is activated every time the door closes. As the seal materials age, the spring action pushes the seal snuggly to the threshold to reestablish a like new fit.
Ease of Installation — Quiet Door™ Automatic Door Sweeps install easily and only require a drill / drill bits , for pre drilling, and few basic hand tools. Instructions are included in the packaging.
Energy Saving — Quiet Door™ Automatic Door Sweeps not only improve the soundproofing performance of common doors, but they also improve the thermal capabilities by reducing airflow transfer.
Variety — Quiet Door™ Automatic Door Sweeps are sold in packages that treat a standard 32 to 36 in. wide door. Quiet Door™ Automatic Door Sweeps are available for 48 and 60 inch wide doors. For over-sized door applications, please contact our Acoustic Consultants for information.
- Apartment and Condo Doors
- Band Practice Rooms
- Broadcast Studios
- Computer and Equipment rooms
- Dog kennel Doors
- Home Theater Doors
- Hotel and Resort Doors
- Office and Conference Room Doors
- Recording Studio Doors
- Warehousing and Industrial Manufacturing Facility Doors
Soundproofing seals and sweeps are tested with operational doors. Operational meaning they open and close like a door should. Then, a separate test is completed on a “static door”, a door that is non operational. The static door will have a higher Sound Transmission Class (STC) number due to the lack of air gaps. When a door is hung the soundproofing performance plummets because of the additional air spaces. Compare the static door rating to the operational door rating. The smaller the difference in STC rating, the better the perimeter seals and sweeps will reduce noise transfer.
All of our Quiet Door™ Soundproofing products were tested as assemblies and not single products. Our tests included perimeter seals, doors sweeps and thresholds. For help in choosing an assembly or single product for your situation, please give our friendly consultants a call at 1-866-949-9269.
UL10B & CAN4-S104-80M CLASSIFIED — complies with NFPA 80 and NFPA 252 for application to Steel fire doors rated up to 3 hrs., and Wood type fire doors rated up to 1 ½ hrs. (Rating on some items may vary and are noted.)
POSITIVE PRESSURE UL10C CLASSIFIED — Category ‘J’ listed. Complies with IBC, UBC7-2 (1997) NFPA 80 and NFPA 252 for application to Positive Pressure Steel fire doors rated up to 3 hrs., and Wood type fire doors rated up to 1 ½ hrs. (Rating on some items may vary and are noted.)
SMOKE & DRAFT CONTROL GASKETING — Category ‘H’ listed. Complies with IBC, UBC7-2 (1997) Part 2, UL1784, NFPA 105 for use on ‘S’ labeled Positive Pressure Steel fire doors rated up to 3 hrs., and wood type fire doors rated up to 1 ½ hrs.
ACOUSTICAL TESTED — to ASTM E90 and ASTM E413, by Riverbank Acoustical Laboratories in Geneva, IL.
AIR INFILTRATION TESTED — to ASTM E283, Standard Test Method for Determining Rate of Air Leakage Through Exterior Windows, Curtain Walls, and Doors.
ANSI/BHMA CERTIFIED — Certified gasketing complies with A156.22-2005, and is listed in the BHMA Certified Products Directory.
CAUTIONS AND LIMITATIONS
The Quiet Door™ line of perimeter seals and sweeps can be used on almost any door to reduce sound transfer and they can be used on almost any door type. Some older doors may not have enough mounting area. Please double check all measurements and dimensions.
Do not pull drop bar out of case unless disengaged from spring or damage will occur and void warranty.
The Quiet Door™ line of perimeter seals and sweeps may need to be trimmed to fit. When trimming our Adjustable or Automatic products, care should be taken to not cut internal mechanisms that could impact the functionality of the product.
Some pre-drilling is required.